Remote-processing RPC-210 Manual do Utilizador descarregar pdf (Página 28)

RAM BASIC SECTION 5

Page 5-3

RPBASIC-52 Programming manual differences

The limits for the commands listed below are different

than shown in the RPBA SIC-52 m anual.

Command RPBA SIC

manual

RPC-210

PEEK B segment = 0 to 7 segment = 0 to 15

PEEK F segment = 0 to 7 segment = 0 to 15

PEEK W segment = 0 to 7 segment = 0 to 15

PEEK $ segment = 0 to 7 segment = 0 to 15

The main difference is PEEK type com mands access

segments from 0 to 15 instead of 0 to 7. segments 8-15

are from F lash EPROM . Data is saved to Flash using

BSAVE. See LOA D_SAV .BAS for access exam ples.

See Note above regarding changes to BSAVE command

starting about 2012..

POKE type commands only write to RAM.

APPLICATION PROGRAMS

The following programs are in the BASIC52 directory.

File Name Description

ARRAYS.BAS Program fragment to store and

read mixed data types from

RAM.

LOAD_SAV.BAS Uses BLOAD /BSAVE for

Flash access, PEEK/ POKE

commands for data access. See

note about changes to BSAVE

command starting about 2012.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Sem comentários

Remote-processing RPC-210 Manual do Utilizador Página 28