Remote-processing RPC-52 Manual do Utilizador descarregar pdf (Página 23)

CHAPTER 6 DIGITAL AND OPTO PORTS

Page 21

COMMANDS

The following tables shows the RPBASIC-52 commands

used for digital I/O.

Command Function

CONFIG LINE Configures I/ O ports

G5MOD Function returns analog value from an

opto module slot.

G5MOD Statement writes to an analog opto

module at an opto module slot.

LINE Function returns status of an opto

module as a 0 or 1.

LINE Statement turns on or off an opto

module.

LINE B Function returns 8 data bits from any

I/O type device.

LINE B Statement writes 8 data bits to any I/O

type device.

LINE # Function returns status of line at J4

connector as a 0 or 1.

LINE # Statement wr ites data to a line at J4

connector as a 0 or 1.

PWM Sets PWM duty cycle for channel 0 or

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Sem comentários

Remote-processing RPC-52 Manual do Utilizador Página 23